ZoneBtuBTU per head, per room, per orientation — not one number for the house.

What size mini split does a 600 sq ft living room in Norwalk, CT need?

600 ft² living room in Norwalk, CT
15,000BTU/hr
13,588 BTU/hr of load at 20.6 BTU/ft² — the figure for 1,062 cooling degree days
600 ft² living room in Norwalk, CT15,000 BTU/hrHead size to buy13,588 BTU/hrCalculated load13,200 BTU/hrWhat the 20 BTU/f…
Head size to buy15,000BTU/hr
Calculated load600 ft² × 20.6 BTU/ft² × 1.1 for a living room13,588BTU/hr
BTU per square foot hereinterpolated from Norwalk's 1,062 cooling degree days20.6BTU/ft²
What the 20 BTU/ft² rule givesthis room needs 3% more than the rule says13,200BTU/hr
Summer design temperature88°F
Winter design temperaturea mini split heats too — this is the number that decides whether it can carry the room alone9°F
Summer day–night swinga humid climate15°F
Days at or above 90°F8days/yr
Oversize from the size stepwithin the normal step10%

Notes

  • The "20 BTU per square foot" rule is a Midwest number. Norwalk runs 1,062 cooling degree days, which works out to 20.6 BTU/ft² — so for this living room the rule is 3% short. A single national figure has to be wrong somewhere, and this is where.
  • Living room: more people, more glazing, more electronics. The 1.1× factor accounts for that.
  • 15,000 BTU/hr sits close to the load, which is where a mini split works best. Inverter equipment is happiest running long and slow at part load; it is the short, hard cycles of an oversized head that leave a room cold and damp.
  • Norwalk is humid — summer nights stay within 15°F of the day's high, the signature of humid air. A meaningful share of this head's work is removing moisture, and it only removes moisture while it is running. This is the climate where an oversized head produces a room that reads cold and feels clammy.
  • Do not forget the winter side. Norwalk designs to 9°F. A cold-climate rated head will hold most of its capacity there, but a standard one will not — ask for the capacity at 9°F in writing.
  • Where these numbers come from. Sikorsky Memorial Airport, 24 km from downtown Norwalk, daily records 2015–2024. Design temperatures are calibrated against published ASHRAE values at eight airports and land within about 2°F of them.

The short answer

A 600 square foot living room in Norwalk, CT needs a head of about 15,000 BTU per hour. The calculated load is 13,588 BTU/hr.

Where that number comes from

Norwalk, CT runs 1,062 cooling degree days a year, which puts the room at 20.6 BTU per square foot rather than the 20 BTU/ft² the generic charts use. Applied to this room the rule gives 13,200 BTU/hr.

The winter half of the question

Norwalk, CT designs to 9°F. A mini split is a heat pump, and its heating capacity falls as the outdoor temperature drops — the nameplate is measured at 47°F, not at the temperature you actually need it.

Sizing a single room is not sizing a house

There is no other room to absorb a mistake. An oversized head short-cycles, never runs long enough to dehumidify, and leaves the room cold and damp.

Nearby sizes

Read more